Chris Pile wrote:
Take out one screw, not all of them.
right!
| Official Luthiers Forum! http://www-.luthiersforum.com/forum/ |
|
| does anyone know this measurement please? http://www-.luthiersforum.com/forum/viewtopic.php?f=10137&t=53179 |
Page 1 of 1 |
| Author: | the_doc735 [ Fri May 01, 2020 3:45 pm ] |
| Post subject: | does anyone know this measurement please? |
does anyone know this measurement please? (on a PRS knife edge tremolo screw): from 'head' to slot.... I want to make a 'spacer'/gauge/tool. |
|
| Author: | Chris Pile [ Fri May 01, 2020 5:51 pm ] |
| Post subject: | Re: does anyone know this measurement please? |
You have no calipers or a micrometer? |
|
| Author: | the_doc735 [ Fri May 01, 2020 7:09 pm ] |
| Post subject: | Re: does anyone know this measurement please? |
Chris Pile wrote: You have no calipers or a micrometer? I have a digital vernier caliper. I think I also have a micrometer in somebodies garage somewhere? and metal rulers of various thicknesses + feeler gauges. But I just wondered if anyone already knew without me having to dismantle the whole thing again. |
|
| Author: | Chris Pile [ Fri May 01, 2020 11:17 pm ] |
| Post subject: | Re: does anyone know this measurement please? |
Take out one screw, not all of them. |
|
| Author: | the_doc735 [ Sat May 02, 2020 12:51 am ] |
| Post subject: | Re: does anyone know this measurement please? |
Chris Pile wrote: Take out one screw, not all of them. right!
|
|
| Author: | Clinchriver [ Sat May 02, 2020 8:13 pm ] |
| Post subject: | Re: does anyone know this measurement please? |
Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge"  Good Luck |
|
| Author: | the_doc735 [ Mon May 04, 2020 2:43 pm ] |
| Post subject: | Re: does anyone know this measurement please? |
Clinchriver wrote: Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge" Good Luck can't find that page? |
|
| Author: | Clinchriver [ Tue May 12, 2020 4:20 pm ] |
| Post subject: | Re: does anyone know this measurement please? |
the_doc735 wrote: Clinchriver wrote: Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge" Good Luck can't find that page? https://www.youtube.com/watch?v=cHA_xu844Rs |
|
| Author: | the_doc735 [ Wed May 13, 2020 6:10 am ] |
| Post subject: | Re: does anyone know this measurement please? |
Clinchriver wrote: the_doc735 wrote: Clinchriver wrote: Use a 2.5mm Allen wrench for a feeler gage. Unstrung, trem body sitting on the body of the guitar, from the top of the trem body to underneath the screw head X 6. Look up John Mann's guitar vault, "Installation Instructions for a 6 post bridge" Good Luck can't find that page? https://www.youtube.com/watch?v=cHA_xu844Rs great! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|